Decware Zen Triode Model SE84C+

Products > Home Audio > Amplifiers

Average rating: Your rating:

Please click here to upload an image of the Decware Zen Triode Model SE84C+.


The SE84C+ is a 2 watt per channel Single Ended Triode amplifier capable of driving almost a dead short - rare in the world of SET amplifiers! It can be driven directly from any source (such as your CD player or DAC) without a preamp. It will drive typical hi-fi speakers to conversation listening levels and hi-efficiency speakers (94dB 1w1/m) to a satisfyingly loud level. The amplifier operates in pure class A and has zero negative feedback. The bass surprises everyone. It features two inputs and a selector switch so you can have two sources. The volume control is mounted on the front. Tubes for it are more than affordable, the amp is self biasing making it a completely hassle free experience to own and enjoy one. It comes with a lifetime warranty because it's actually built that well.

Weight 17 lbs. ea.
Dimensions 8.0" H x 6.125" W x 12.0" D
Circuit type Single ended Class A Triode
Power output 2.3 watts RMS into 4 ohms
5 watts RMS into 8 ohms bridged
Power increases as ohms decrease
Stable into 1 ohm speaker loads
Input voltage 2.0 volts for full output
Noise / Hum Less than 1.5 millivolts
Response 20 Hz ~ 20 kHz
Feedback ZERO negative feedback used
Rectification 5U4G / tube rectification
Output tubes SV83 or EL84/6BQ5
Signal tube 6N1P or 6922 or 6Dj8
Transformers Decware
Biasing Self-Biasing
Resistors precision WW/MF by DALE, VISHAY
Signal Cap Polyurethane Film
AC cord Removable power cord
Consumption 65 watts at full power
Input jacks RCA type 24K Gold / Teflon
Output jacks 5-way binding posts accept 12 gauge
Speaker dB/1w 89 dB minimum / 96 dB is ideal
Warranty Lifetime to original owner




Please login to write a review of the product above.